or 6 weekly interest-free payments from
$200.00
or 6 weekly interest-free payments with an initial payment of
$5,990.00
and weekly payments of $200.00What's this?
Receive your purchase now, spread the total cost over 6 weekly automatic payments. Interest free!
Simply select Laybuy as your payment method at checkout
Login or Register for Laybuy and complete your order in seconds
Complete your purchase using an existing debit or credit card
Pay over 6 weeks and receive your purchase now
Qty.
Request a Price
Thank you for filling out your application.
CL75 is a hydrostatic walk-behind mower. Suitable for high grass, weeds and bush which are guided into the cutter deck and cut by the blade with (shock-resistant) swinging tips made of special steel. The cut material is rear discharged.
The cutter deck’s front aperture lifts up automatically when entering high vegetation without crushing it down, considerably increasing the efficiency of the cut. The cutter deck is made of fabricated steel and the cutting height can be adjusted and easily controlled by means of a simple hand wheel. The cutting deck is kept parallel to the ground in all cutting height positions.
The cutting deck blades tips are moulded with a special profile so to reduce noise to the maximum and guarantee an excellent quality cut. With a maximum cutting height of 150mm it is ideal coping with very uneven ground avoiding accidental bumps on the soil.
The cutting deck’s small front tyre is solid, i.e. puncture-proof!
CL75 has a perfect weight distribution and a low centre of gravity. The result is perfect balance!
Technical Data:
Engine: Honda GXV340 OHV
Start: recoil starter
Fuel: petroll
Displacement: 337 cc, 1 Cylinder
Power: 8.9 HP (6.6 kW) @ 3300 rpm
Torque: 21.6 Nm @ 2500 rpm
Consumption: 2.3 L/h
Fuel tank capacity: 2.6 L
Drive: Hydrostatic transmission
Traction: 2WD
Cutting type: Rear discharge with front swing opening
Cutting configuration: 1 rotating blade with 2 shockproof floating blades
Cutting width: 78 cm (31")
Cutting height: from 5 to 15cm continuously and rapidly adjustable by means of a crank lever
Technical Data: